HYDRO BARRIER™ Plus
Produkt #
HYDRO BARRIER™ Plus is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproofing membrane / crack isolation membrane.
Produktüberblick
HYDRO BARRIER™ Plus is a thin, load bearing, self-curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproofing membrane / crack isolation membrane. It can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
Equipped with Microban® antimicrobial product protection to protect the membrane from the growth of stain and odor causing bacteria, mold and mildew.
Learn about additional waterproofing and crack isolation solutions.
Info und Leitfäden
-
Produktdatenblätter
-
Garantien
-
Marketing-Informationen
-
Sicherheitsdatenblätter
-
Zulassungen und Zertifizierungen
-
Informationen zur Installation
Merkmale und Vorteile
- Allows for flood testing in 12 hours^
- Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
- Changes in color from a light blue to darker blue when cured
- Lighter color for ease of inspection and enhanced visibility during application
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
- No additional fabric required
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
- Exceeds ANSI A118.10 and A118.12
- IAPMO approved
- Equipped with Microban® antimicrobial technology to protect the membrane from the growth of stain and odor causing bacteria, mold and mildew
- Safe—no solvents and non-flammable^When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
Produktdaten
Details
| Patentnummer(n) | |
|---|---|
| Verfügbare Farben | Natural Aluminum |
| Teil eines Systems | LATICRETE® |
| Verfügbarkeit nach Land | Canada, United States |
| Substrates | Außensperrholz, verleimt (Nur für Innenbereiche), Beton, Beton- und Ziegelmauerwerk, Gegossener Gipsuntergrund, Gipskartonplatten (Nur für trockene Innenbereiche), Gipsputz (Nur für trockene Innenbereiche), HYDRO BAN-Platten (Siehe Produktdatenblatt (DS 040.0) für spezifische Montageempfehlungen), Zementmörtelbett, Zementputz, Zement-Terrazzo, Zementträgerplatte |
| Packungsgrößen |
5 Gal (19 L) pail liquid (36 full units/pallet) 3.5 Gal (13.3 L) pail liquid (48 full units/pallet) 4 x 1 Gal(3.8 L) pails of liquid packed in a carton (30 cartons/pallet) |