Category Products
Page 1 of 1
LATICRETE® Hydro Ban®
LATICRETE Hydro Ban is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. LATICRETE Hydro Ban bonds directly to a wide variety of substrates.
- Allow for flood testing in 2 hours at 70°F (21°C) or higher*
- Does not require the use of fabric.**
- Bonds directly to metal and PVC plumbing fixtures only.
- Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured.
- Changes in color from a light sage to an olive green when cured.
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks.
- "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
- Exceeds ANSI A118.10 and A118.12.
- IAPMO approved.
- Contains Microban® antimicrobial product protection.
- Rapid drying for a faster time to tile.
- Lighter color for ease of inspection.
- Safe—no solvents and non-flammable.
- Install tile, brick and stone directly onto membrane.
* Refer to cautions section of datasheet for more information on curing
** For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions
LATICRETE® 9235 Waterproofing Membrane
LATICRETE 9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.
- Inhibits stain causing mold and mildew growth in the substrate with Microban® antimicrobial product protection
- Safe — no solvents and non-flammable
- Interior and exterior use
- Vertical and horizontal surfaces (including ceilings)
- Thin—only 0.02" (0.5 mm) thick when cured
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and
other non-structural cracks
- “Extra Heavy Service” rating per TCNA performance levels
(RE: ASTM C627 Robinson Floor Test).
- IAPMO and ICC Approval
- Applies quickly with a paint brush or roller—no special mixing
or application equipment needed
- Fast cure—normally ready in hours for finishes
- Install tile, brick and stone directly onto membrane
- Certified Children and Schools by The GREENGUARD
Environmental Institute
- Easy cleanup—just use water while fresh
- Protects concrete & reinforcing steel from corrosion
LATICRETE® Hydro Barrier™
LATICRETE Hydro Barrier is a thin, load bearing, self curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. LATICRETE Hydro Barrier can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.
- Allows for flood testing in 24 hours.*
- Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured.
- Changes in color from a light blue to darker blue when cured.
- Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks.
- “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
- Exceeds ANSI A118.10 and A118.12.
- IAPMO approved containing Microban® antimicrobial product protection.
- Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH.
- Lighter color for ease of inspection.
- Safe—no solvents and non-flammable.
- Install tile, brick and stone directly onto membrane.
* When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.
LATICRETE® Tile Drain Mat
Part of the LATICRETE Plaza and Deck system. Lightweight, efficient drainage mat; 300% better flow rate than crushed gravel drain bed. Mat Thickness: 1/4" (6 mm) supplied in rolls. Mat is engineered to permit maximum load transfer to structural deck while allowing lateral flow of infiltrated water to flow easily to drains. Patent # 5,383,314
When used as a component of the LATICRETE Plaza & Deck System:
- Thin and lightweight, reduces dead load by 50%
- Frost and Weather Resistant
- Protects the tile installation from water damage and frost heaving
- Provides integral subsurface drainage for extra heavy traffic conditions
- Single source responsibility
- "Extra Heavy Service" rating per TCNA performance levels
(RE: ASTM C627 Robinson Floor Test).
- For new projects and renovations
- Reduces potential for efflorescence
Page 1 of 1
How to waterproof flooring and walls.
Effective waterproofing made simple.
Industry standard waterproof membrane for wet areas.
LATICRETE is proud to have become the standard for waterproofing of floors and walls. For applications ranging from occasionally wet to continuous water submersion, LATICRETE waterproofing products are unmatched in effectiveness and ease of application. Waterproof flooring, concrete waterproofing, and bathroom and shower waterproofing are made effortless thanks to the dedicated efforts of the development team at LATICRETE.
When plans call for watertight needs, nothing compares to the full line of LATICRETE time-tested and industry-recommended waterproofing products. Whether your project needs to endure occasional wetness or requires a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas, LATICRETE has the right waterproofing product for you.
LATICRETE products provide the full waterproofing package allowing you to complete your project with ease in less time—saving you money and future headaches.
LATICRETE waterproofing membranes, waterproofing systems for waterproof flooring, bathroom and shower waterproofing have product features ranging from lifetime warranties, flood-testing in as little as two hours, IAPMO and ICC code approved, meet ANSI A118.10 and ANSI A118.12, and Microban® antimicrobial protection, just to name a few. Don’t trust your reputation or your project to anything but the best, LATICRETE waterproofing products have been custom-formulated to deliver incredible and consistent results.
Laticrete is committed to creating solutions today that help preserve a better tomorrow. LATICRETE proudly provides tile and stone installation materials certified by GREENGUARD based on criteria used by the U.S. EPA, OSHA and the U.S. Green Building Council’s LEED-CI program. The GREENGUARD certification on LATICRETE products is your assurance that the specified LATICRETE Systems meet appropriate indoor air quality standards for volatile organic compounds (VOCs).