Dealers » Products » Waterproofing

 

 

Category Products

Page 1 of 1
HYDRO BAN® is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.

HYDRO BAN®

HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners. HYDRO BAN is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane. HYDRO BAN bonds directly to a wide variety of substrates.

  • Allow for flood testing in 2 hours at 70°F (21°C) or higher¥
  • Does not require the use of fabric.*
  • Bonds directly to metal, PVC and ABS plumbing fixtures only
  • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
  • Changes in color from a light sage to an olive green when cured
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
  • Exceeds ANSI A118.10 and A118.12
  • IAPMO approved
  • Contains Microban® antimicrobial product protection
  • Rapid drying for a faster time to tile
  • Lighter color for ease of inspection
  • Safe—no solvents and non-flammable
  • Install tile, brick and stone directly onto membrane

* For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions

¥ Refer to cautions section for more information on curing


9235 Waterproofing Membrane is “The Industry Standard” for wet areas and continuous water submersion applications. Applies with a paint roller or brush, cures in just hours and provides a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas.

9235 Waterproofing Membrane

9235 Waterproofing Membrane is a thin, load-bearing waterproofing designed specifically for the special requirements of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproofing membrane that bonds to a wide variety of substrates.

  • Inhibits stain causing mold and mildew growth in the substrate with Microban® antimicrobial product protection
  • Safe — no solvents and non-flammable
  • Interior and exterior use
  • Vertical and horizontal surfaces (including ceilings)
  • Thin—only 0.02" (0.5 mm) thick when cured
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
  • IAPMO and ICC Approval
  • Applies quickly with a paint brush or roller—no special mixing or application equipment needed
  • Fast cure—normally ready in hours for finishes
  • Install tile, brick and stone directly onto membrane
  • Certified Children and Schools by The GREENGUARD Environmental Institute
  • Easy cleanup—just use water while fresh
  • Protects concrete & reinforcing steel from corrosion


HYDRO BAN® Sheet Membrane

HYDRO BAN Sheet Membrane is a waterproof sheet membrane that is installed using a substrate appropriate LATICRETE thin-set. Due to its polymeric construction, HYDRO BAN Sheet Membrane can also be used as a vapor barrier/waterproofing membrane for steam room and steam shower applications. Available in rolls, tapes, corners and collars, HYDRO BAN Sheet Membrane allows for a quick, easy waterproof installation, which will retain its integrity for the life of the installation.

  • ANSI A118.10 - Exceeds all requirements
  • ASTM E96/E96M Procedure E-0.06 Perms - approved for steam showers / rooms as single membrane
  • IAPMO approved
  • Pliable – conforms easily to substrate
  • Complete line of accessories – single source supply
  • Allows for installation over green mortar beds
  • Installs with modified or unmodified thin-set
  • Compatible with most HYDRO BAN products

Refer to requirements for specific substrate to which the HYDRO BAN Sheet Membrane will be bonded


HYDRO BARRIER™ is a thin, load bearing, self curing liquid rubber polymer which can be easily applied to form a flexible, seamless waterproof anti-fracture membrane.

HYDRO BARRIER™

HYDRO BARRIER is a thin, load bearing, self curing liquid rubber polymer which can be easily applied to form a flexible seamless waterproof/anti-fracture membrane. HYDRO BARRIER can be used on interior and exterior, horizontal or vertical surfaces and is approved by IAPMO for use as shower pan liner.

  • Allows for flood testing in 24 hours.*
  • Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured.
  • Changes in color from a light blue to darker blue when cured.
  • Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks.
  • “Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
  • Exceeds ANSI A118.10 and A118.12.
  • IAPMO approved containing Microban® antimicrobial product protection.
  • Fast curing; allows foot traffic in 4–6 hours @ 70°F (21°C), 50% RH.
  • Lighter color for ease of inspection.
  • Safe—no solvents and non-flammable.
  • Install tile, brick and stone directly onto membrane.

* When cured 70°F (21°C) or higher at 50% RH lower temperature at higher RH will require long cure times.



LATAPOXY® Waterproof Flashing Mortar is an epoxy-based 3 component, trowel applied, waterproofing, and vapor barrier membrane.

LATAPOXY® Waterproof Flashing Mortar

LATAPOXY® Waterproof Flashing Mortar is an epoxy-based 3 component, trowel applied, waterproofing, and vapor barrier membrane. It can be used to waterproof seams, gaps or joints between a variety of substrates and metal and PVC pipe penetrations or flashing. It is specifically designed to be used under ceramic tile, stone or brick for rapid installations which require a fast curing waterproof flashing. LATAPOXY Waterproof Flashing Mortar is flexible, easy to apply and will allow for rapid installations.

  • Fast curing
  • Waterproof epoxy based formula
  • Extremely flexible
  • Easy to apply using a trowel
  • Adheres to metal and PVC pipes, drains and flashing
  • Waterproof seam between flashing and façade

Part of the Plaza and Deck system. Mat is engineered to permit maximum load transfer to structural deck while allowing lateral flow of infiltrated water to flow easily to drains.

Tile and Drain Mat

Part of the Plaza and Deck system. Lightweight, efficient drainage mat; 300% better flow rate than crushed gravel drain bed. Mat Thickness: 1/4" (6 mm) supplied in rolls. Mat is engineered to permit maximum load transfer to structural deck while allowing lateral flow of infiltrated water to flow easily to drains. Patent # 5,383,314

When used as a component of the Plaza & Deck System:

  • Thin and lightweight, reduces dead load by 50%
  • Frost and Weather Resistant
  • Protects the tile installation from water damage and frost heaving
  • Provides integral subsurface drainage for extra heavy traffic conditions
  • Single source responsibility
  • "Extra Heavy Service" rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test).
  • For new projects and renovations
  • Reduces potential for efflorescence


Page 1 of 1

How to waterproof flooring and walls.

Effective waterproofing made simple.

Industry standard waterproof membrane for wet areas.

LATICRETE is proud to have become the standard for waterproofing of floors and walls. For applications ranging from occasionally wet to continuous water submersion, LATICRETE waterproofing products are unmatched in effectiveness and ease of application. Waterproof flooring, concrete waterproofing, and bathroom and shower waterproofing are made effortless thanks to the dedicated efforts of the development team at LATICRETE.

When plans call for watertight needs, nothing compares to the full line of LATICRETE time-tested and industry-recommended waterproofing products. Whether your project needs to endure occasional wetness or requires a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas, LATICRETE has the right waterproofing product for you.

LATICRETE products provide the full waterproofing package allowing you to complete your project with ease in less time—saving you money and future headaches.

LATICRETE waterproofing membranes, waterproofing systems for waterproof flooring, bathroom and shower waterproofing have product features ranging from lifetime warranties, flood-testing in as little as two hours, IAPMO and ICC code approved, meet ANSI A118.10 and ANSI A118.12, and Microban® antimicrobial protection, just to name a few. Don’t trust your reputation or your project to anything but the best, LATICRETE waterproofing products have been custom-formulated to deliver incredible and consistent results.

Laticrete is committed to creating solutions today that help preserve a better tomorrow. LATICRETE proudly provides tile and stone installation materials certified by GREENGUARD based on criteria used by the U.S. EPA, OSHA and the U.S. Green Building Council’s LEED-CI program. The GREENGUARD certification on LATICRETE products is your assurance that the specified LATICRETE Systems meet appropriate indoor air quality standards for volatile organic compounds (VOCs).


One LATICRETE Park North, Bethany, CT 06524-3423 USA · 1.800.243.4788 · +1.203.393.0010

Copyright © 2014 LATICRETE International, Inc.  All trademarks shown are the intellectual properties of their respective owners.  Terms Of Use  Privacy Statement

LATICRETE Facebook Page LATICRETE Twitter Feed LATICRETE Pinterest Boards
LATICRETE YouTube Channel Henry's Blog LATICRETE LinkedIn Profile