Category Products

Page 1 of 1
The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

254 Platinum

The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. 254 Platinum, designed to just mix with water, has a long open time with unsurpassed adhesion and workability. 254 Platinum is a LATICRETE approved substitute for 211 Powder mixed with 4237 Latex Additive.

Excellent for exterior and underwater applications as well as providing superior bond to exterior glue plywood (interior only) and concrete. The ultimate thin-set for porcelain and glass tiles.

  • Contains Microban® antimicrobial protection to inhibit the growth of stain causing mold and mildew in the substrate.
  • Exceeds ANSI A118.4 Shear Bond Strength Requirements & ANSI A118.11.
  • Conforms to ISO 13007 with a classification of C2TES1P1
  • Ultimate adhesion for porcelain and glass tiles.
  • Incredible bond to exterior glue plywood and concrete*.
  • Superior for exterior and submerged applications.
  • High shear bond strength.
  • Smooth creamy formula.

* See limitations.


The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick.

254R Platinum Rapid

The ultimate one-step, polymer fortified, thin-set mortar for interior and exterior installation of ceramic tile, stone, quarry tile, pavers and brick. 254R Platinum Rapid is designed to mix with water and provide unsurpassed adhesion and workability.

Excellent for exterior and under water applications, with a superior bond to exterior glue plywood and concrete. 254R Platinum Rapid is the ultimate adhesive for porcelain tiles.

  • Contains Microban® antimicrobial protection to inhibit the growth of stain-causing mold and mildew in the substrate.
  • Exceeds ANSI A118.4 Shear Bond Strength Requirements & ANSI A118.11.
  • Rapid Set Mortar; can be grouted in 2–4 hours.
  • Ultimate adhesion for porcelain tiles.
  • Incredible bond to exterior glue plywood and concrete*.
  • Excellent shear bond strength.
  • Superior adhesion for submerged applications.
  • High performing smooth creamy formula.

* See limitations.



Glass Tile Adhesive Mortar is a one-step, non-sag, polymer fortified adhesive mortar that is specifically formulated for use in glass tile applications.

Glass Tile Adhesive Mortar

Glass Tile Adhesive Mortar is a water mixed, non-sag, polymer fortified adhesive mortar that is specifically formulated for use in glass tile applications. Glass Tile Adhesive Mortar has great workability and produces an ultra white finish that enhances the look of glass mosaics, glass tile, and most any translucent tile or stone. In addition to containing Microban® antimicrobial protection, Glass Tile Adhesive Mortar is GREENGUARD certified for low VOC. Glass Tile Adhesive Mortar can also be used with porcelain or ceramic tile.

Uses

Designed for interior, exterior, and submerged installations of all types of glass tiles over concrete, exterior glue plywood (interior, dry areas only), and a variety of other substrates.

  • Consistent, ultra white color across the entire application area
  • Optimal bond strength with minimal shrinkage
  • Single component with no admix needed, just add water
  • Superior non-sag performance
  • Smooth and creamy consistency
  • Equipped with Microban
  • GREENGUARD certified
  • Exceeds ANSI A118.4 and ANSI A118.11 bond strength requirements when mixed with water


Page 1 of 1

 


One LATICRETE Park North, Bethany, CT 06524-3423 USA · 1.800.243.4788 · +1.203.393.0010

Copyright © 2014 LATICRETE International, Inc.  All trademarks shown are the intellectual properties of their respective owners.  Terms Of Use  Privacy Statement

LATICRETE Facebook Page LATICRETE Twitter Feed LATICRETE Pinterest Boards
LATICRETE YouTube Channel Henry's Blog LATICRETE LinkedIn Profile