 |
LATICRETE® Hydro Ban™
LATICRETE invented and set the standard for thin load-bearing waterproofing membranes 40 years ago. We have now re-invented the category again! LATICRETE® Hydro Ban™ is a revolutionary new waterproofing/anti-fracture membrane for commercial or residential applications. No other waterproofing membrane offers such incredible features as:
- No fabric required in the field, coves or corners!
- Allows for flood testing in only 24 hours at 70°F (21°C).
- Bonds directly to metal drains and PVC pipe penetrations.
- Roller, trowel or paint brush applied.
- One component, very low odor, water cleanable!
- Exceeds ANSI A118.10 and ANSI A118.12 requirements.
|
|
|
|
|
 |
LATICRETE 9235 Waterproofing Membrane
LATICRETE 9235 Waterproofing Membrane is “The Industry Standard” for wet areas and continuous water submersion applications. Applies with a paint roller or brush, cures in just hours and provides a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas. LATICRETE 9235 Waterproofing Membrane is accepted by IAPMO and ICC for shower pans, meets ANSI A118.10 and ANSI A118.12, is non-hazardous and meets all V.O.C. requirements. When anti-fracture treatment is required in wet areas, LATICRETE 9235 Waterproofing Membrane provides the complete package. You only need one product to protect your floor from water damage and substrate cracks. Inhibits the growth of stain-causing mold and mildew in membranes with Microban® antimicrobial product protection. ASTM C627 Rated “Extra Heavy” Service. |
|
|
|
|
 |
LATICRETE Contractor Grade WPM
LATICRETE Contractor Grade WPM is a thin, load-bearing waterproofing designed for interior waterproofing of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproof. IAPMO approved, exceeds ANSI A118.10. |
|
|
|
|
 |
LATICRETE Watertight™
A liquid rubber waterproofing designed for use under ceramic tile and stone in intermittent wet areas such as bathrooms spas and kitchens. LATICRETE Watertight™ is specifically designed for residential applications to protect the substrate behind the tile or stone from water damage which could lead to costly repairs and the growth of mold and mildew. Whether over cement board, plywood or gypsum wall board, LATICRETE Watertight applies like paint and is installed easily, ready for tile in just two hours after installation. Available in two packaging sizes and equipped with Microban antimicrobial product protection, LATICRETE Watertight offers protection and insurance for just pennies per square foot.
|
|
|
|
|
 |
LATAPOXY® 24hr HydroProofing™
Rapid curing and extremely flexible, this trowel applied waterproof membrane allows flood testing in just 24 hours. This high performance, 3-component epoxy requires no fabric, adheres to steel, pipes and collars and can be built up to 1/4" (6 mm) to fill gaps in concrete and around drain collars. |
|
|
|
|
 |
LATICRETE Blue 92 Anti-Fracture Membrane
A 2 part system that forms a highly flexible, full coverage membrane that reduces crack transmission from the substrate to floor finishes. Adds no appreciable thickness to floor construction, and is ready to receive floor finish in just a few hours. Easy to install, no odors and cleans up with water. LATICRETE Blue 92 Anti-Fracture Membrane inhibits the growth of stain-causing mold and mildew in substrates with Microban antimicrobial product protection. ASTM C627 Rated “Extra Heavy” Service. Applicable standard ANSI A118.12. |
|
|
|
|
 |
LATICRETE Crack Suppression Kit
Conveniently packaged 2-part system for spot treatment of substrate cracks. Reduces crack transmission in ceramic tile, thin brick and stone. Adds no appreciable thickness to floor construction, and is ready to receive floor finish in just a few hours. Easy to install, no odors and cleans up with water. Inhibits the growth of stain-causing mold and mildew in substrates with Microban antimicrobial product protection. Applicable standard ANSI A118.12. |
|
|
|