 |
LATICRETE® 125 Sound and Crack Adhesive
Comprised of a special liquid latex, and Kevlar® reinforced rubber fibers, LATICRETE® Sound & Crack Adhesive reduces impact sound transmission and provides exceptional anti-fracture protection – all in one simple step! Just mix, spread and set!
|
| |
|
|
|
 |
LATICRETE Blue 92 Anti-Fracture Membrane
A 2 part system that forms a highly flexible, full coverage membrane that
reduces crack transmission from the substrate to floor finishes. Adds no
appreciable thickness to floor construction, and is ready to receive floor
finish in just a few hours. Easy to install, no odors and cleans up with
water. LATICRETE Blue 92 Anti-Fracture Membrane inhibits the growth of
stain-causing mold and mildew in substrates with Microban® antimicrobial
product protection. ASTM C627 Rated “Extra Heavy” Service. Applicable
standard ANSI A118.12. |
|
|
|
|
 |
LATICRETE Crack Suppression Kit
Conveniently packaged 2-part system for spot treatment of substrate
cracks. Reduces crack transmission in ceramic tile, thin brick and stone.
Adds no appreciable thickness to floor construction, and is ready to
receive floor finish in just a few hours. Easy to install, no odors and
cleans up with water. Inhibits the growth of stain-causing mold and
mildew in substrates with Microban antimicrobial product protection.
Applicable standard ANSI A118.12. |
|
|
|
|
|
|
 |
LATAPOXY® 312 Vapor Reduction Membrane
LATAPOXY 312 Vapor Reduction Membrane is a 3 component,
roller applied epoxy coating specifically designed to reduce vapor emission in substrates for various floor coverings.
|
| |
|
|
|
|
|
 |
LATICRETE Hydro Ban™
LATICRETE Hydro Ban™ is a thin, load bearing waterproofing/anti-facture membrane that does not require the use of fabric in the field, coves or corners. LATICRETE Hydro Ban is a single component self curing liquid rubber polymer that forms a flexible, seamless waterproofing membrane that bonds directly to a wide variety of plumbing fixtures including those constructed of copper, steel, stainless steel and PVC. |
|
|
|
|
 |
LATICRETE 9235 Waterproofing Membrane
LATICRETE 9235 Waterproofing Membrane is “The Industry Standard” for wet areas and continuous water submersion applications. Applies with a paint roller and utility knife, cures in just hours and provides a permanent waterproofing base for tile, glass mosaic and stone in pools, showers and spas. 9235 is accepted by IAPMO and ICC for waterproofing membranes and shower pans, meets ANSI A118.10 standards, is non-hazardous and meets all V.O.C. requirements. When anti-fracture treatment is required in wet areas, 9235 provides the complete package. You only need one product to protect your floor from water damage and substrate cracks. Inhibits the growth of stain causing mold and mildew in membranes with Microban antimicrobial product pr tection. ASTM C627 Rated “Extra Heavy” Service. |
|
|
|
|
 |
LATICRETE Contractor Grade Waterproofing Membrane
LATICRETE Contractor Grade WPM is a thin, load-bearing waterproofing designed for interior waterproofing of ceramic tile, stone and brick installations. A self-curing liquid rubber polymer and a reinforcing fabric are quickly applied to form a flexible, seamless waterproof. IAPMO approved, exceeds ANSI A118.10. |
|
|
|
|
 |
LATICRETE Watertight™
A liquid rubber waterproofing designed for use under ceramic tile and stone in intermittent wet areas such as bathrooms spas and kitchens. Watertight™ is specifically designed for residential applications to protect the substrate behind the tile or stone from water damage which could lead to costly repairs and the growth of mold and mildew. Whether over cement board, plywood or gypsum wall board, Watertight applies like paint and is installed easily, ready for tile in just two hours after installation. Available in two packaging sizes and equipped with Microban antimicrobial product protection, Watertight offers protection and insurance for just pennies per square foot.
|
|
|
|
|
|
|
 |
LATAPOXY® 300 Adhesive
A high-strength, 3-part 100% solids epoxy adhesive formulated for chemical resistant installations of quarry tile, brick and packing house tile. Prevents curling of water-sensitive marbles and agglomerates. Recommended for mesh mount glass mosaics in swimming pools and resin backed tiles and stones. Will not stain white or light colored marbles. ASTM C627 Rated “Extra Heavy” Service, meets ANSI A118.3 criteria. |
| |
|
|
|
|
|
 |
LATICRETE 255 MultiMax™
Carry only one product onto the jobsite for
virtually all applications with this versatile
lightweight mortar that replaces mastic,
multipurpose and medium bed mortar.
LATICRETE 255 MultiMax™ is reinforced with
Kevlar® for unmatched non-sag performance
and adjustability of large format tile and stone
on walls. Builds up to 3/4" (18 mm) without
shrinkage for floors without any slump, sag
or lippage. Incredibly lightweight consistency
allows for easy troweling onto the substrate
with minimal effort. A 40 lb. (18.2 kg) bag of
LATICRETE 255 MultiMax provides the same
coverage as a 50 lb. (22.7 kg) bag of standard
thin-set mortar. Mixes with water for
maximum strength and performance. Inhibits
the growth of stain-causing mold and mildew
in substrates with Microban antimicrobial
product protection. |
|
|
|
|
 |
LATICRETE 254 Platinum
The ultimate one-step, polymer-fortified
thin-set that provides unsurpassed strength,
far exceeding all ANSI A118.4 and ANSI A118.11
strength requirements. Ideal for interior and
exterior applications on virtually all substrates
and applications, even pools, fountains and
facades. Increases your productivity with long
open time, allowing flexibility on the jobsite
that results in fast, accurate installations.
Easy to trowel mortar assures proper
coverage on both the substrates and the
veneer as well as less fatigue for the
installer. No need to worry with porcelain
tile, even in the most difficult projects. The
exceptional bond strength and easy workability
of LATICRETE 254 Platinum makes this
multipurpose the ultimate adhesive for
difficult to bond porcelain tiles as well as
glass mosaics and large format glass.
Inhibits the growth of stain-causing mold
and mildew in substrates with Microban
antimicrobial protection. |
|
|
|
|
 |
LATICRETE 253 Gold
A smooth and creamy multipurpose thin-set
mortar designed to be mixed with water for
interior and exterior applications. Meets
ANSI A118.4 and ANSI A118.11 strength
requirements. |
|
Additional Information:
- Refer to Data Sheet 296.0
- Material Safety Data Sheet 253g
|
|
 |
LATICRETE 252 Silver
For economical interior and exterior installations. Designed to be mixed with water for a strong bond. Meets ANSI A118.4 and ANSI A118.11* Bond Strength Requirements. |
|
Additional Information:
- Refer to Data Sheet 676.0
- Material Safety Data Sheet 252
|
|
 |
LATICRETE 272 Mortar
A premium thin-set mortar that can be used
for interior use on both floors and walls.
Unique high tack and long adjustment
time. Ideal for use over masonry, concrete,
cement backer board, mortar beds and gypsum
wallboard*. Mix with LATICRETE 333 Super
Flexible Additive for increased performance or
LATICRETE 3701 Mortar Admix for exterior use.
Meets ANSI A118.1 Strength Requirements.
*Interior only. |
|
|
|
|
 |
LATICRETE 317
This smooth and creamy, sanded thin-set
mortar can be used for interior and exterior
applications on floors and walls over masonry,
concrete, cement backer board, mortar beds
and gypsum wallboard*. Mix with LATICRETE
333 Super Flexible Additive for increased
performance or LATICRETE 3701 Mortar Admix
for exterior use. Meets ANSI A118.1 Strength
Requirements.
*Interior only. |
|
|
|
|
|
|
 |
LATICRETE 220 Medium Bed Mortar
A fortified dry-set mortar specifically
formulated to provide a one-step installation
for large format ceramic tile, marble and stone,
including ungauged tiles or installing tiles on
a rough surface. Mix with water. Can be built
up to 3/4" (18 mm). Supports heavy tiles
and stone, reducing lippage problems. For
increased performance over hard to bond
surfaces, mix with LATICRETE 333 Super
Flexible Additive. Mix with LATICRETE 3701
Mortar Admix for exterior use. |
|
|
|
|
|
|
 |
LATICRETE 3701 Mortar Admix
LATICRETE 3701 Mortar Admix and LATICRETE 226 Thick-Bed Mortar is a thick-bed mortar that is exceptionally strong and resistant to weather, frost, thermal and physical shock. Can be used to build high strength concrete patches, stucco and plaster mortars. |
|
|
|
|
 |
LATICRETE 226 Thick Bed Mortar
LATICRETE 226 Thick Bed Mortar is a factory prepared blend of carefully selected raw materials, portland cement and graded aggregates. Designed for use with LATICRETE 3701 Mortar Admix to produce a latex portland cement mortar that has exceptional strength. |
|
|
|
|
|
|
 |
LATICRETE® PermaColor™
LATICRETE® PermaColor™ Grout offers the maximum performance available in a cement-based grout, providing consistent color and Microban® to resist stain-causing mold and mildew. LATICRETE PermaColor Grout is easy to install – just mix with water. LATICRETE PermaColor Grout is ideal for floors and walls in both interior and exterior installations. When you must use a cement-based grout, choose LATICRETE PermaColor Grout.
|
|
|
|
|
 |
LATICRETE 1776 Grout Enhancer
Designed for use with LATICRETE 1500 Sanded
Grout or LATICRETE 1600 Unsanded Grouts.
LATICRETE 1776 Grout Enhancer, when used
in place of water, eliminates shading and
blotching caused by minerals and organic
particles commonly found in domestic water.
Inhibits the growth of stain-causing mold
and mildew in the grout joints with Microban
antimicrobial product protection. ASTM C627
Rated “Extra Heavy” Service. |
| |
|
|
|
 |
LATICRETE 1600 Unsanded Grout
For dense, durable grout joints less than 1/8" (3 mm). Designed for use with LATICRETE 1776 Grout Admix Plus or water. When mixed with 1776, eliminates shading and blotching caused by minerals and organic particles commonly found in domestic water. Inhibits the growth of stain causing mold and mildew in grout joint with Microban antimicrobial product protection. Applicable standard: ANSI A118.6. |
| |
|
|
|
 |
LATICRETE 1500 Sanded Grout
For dense, durable grout joints between 1/16" (1.5 mm) and 1/2" (12 mm). Designed for use with LATICRETE 1776 Grout Admix Plus or water. When mixed with 1776, eliminates shading and blotching caused by minerals and organic particles commonly found in domestic water. Inhibits the growth of stain causing mold and mildew in grout joint with Microban antimicrobial product protection. Meets ANSI A118.7 shrinkage and compressive strength requirements. |
| |
|
|
|
|
|
 |
LATICRETE SpectraLOCK™ PRO Grout (Part AB Liquids)
LATICRETE SpectraLOCK™ PRO Grout is the
finest grout available. LATICRETE SpectraLOCK
PRO Grout offers the high performance, color
uniformity, durability and stain resistance of an
epoxy grout with extraordinary ease of use.
- Maximum stain resistance
- Meets ANSI A118.3
- Improved physical properties, stronger and more durable
- Easy to install; never needs sealing
- Working time of 80 minutes
- Inhibits the growth of stain-causing mold and mildew with Microban
- Can be used on floors and walls
- GREENGUARD certified, low VOC
|
| |
|
|
|
|
|